Lightning and Portable Generator

    Portable Power Generator Reviews

Portable Generator Reviews  |  Camping / Recreational  |  Home / Emergenices  |  Work Sites  |  Accessories   |  Outdoor Gear  |  Power Tools

 

Power Tools: Pneumatic Nail Guns

Types of Nailers:

  • Brad Nailers - Ideal usage is for trim work. Function as down-sized finishing nailers.
  • Coil Nailers - Ideal for all day jobs, shingling, framing. Holds the most fasterners per load.
  • Finishing Nailers - Best for Baseboards, Door Casing, Trim work, Crown molding. Utilize thin strips of finishing nails.
  • Headless pinners - Great for crafts, delicate trim work. Create very small entry holes.
  • Palm Nailers - Used between wall studs and ceiling joists. Ideal for narrow spaces.
  • Staplers - Used for 1/4" or thinner material and also fabric. Use a narrow crown staple.
  • Stick Nailers - Used for framing and various construction tasks. Weigh less than coil nailers but require more frequent reloading.

Below are the popular selections in Brad Nailers, Coil Roofing and Siding Nailers and Finishing Nailers for your review.


Tops In Brad Nailer Pneumatic Nail Guns

   Check Box This specific Brad Nailer by Hitachi is a favorite in air gun nail tools.

July 14, 2023 - This 18 Guage 2 in. Finish Brad Nailer Kit (NT50AE2) by Hitachi features a depth of drive dial that allos the user to easily adjust the drive depth for a professional finish.

A no-mar tip on the nose protects the work piece from unintended markings.

This finish nailer is lightweight (2.2 lbs.) and well-balanced making it easy to use all day long. The elastomer grip also adds comfort and prevents slippage.

Selective Actuation allows the user to select bump fire or contact fire modes with the simple flip of a switch.

Read Reviews and Purchase at: Amazon.com

Hitachi NT50AE2 18-Gauge 5/8 inch to 2 inch Brad Nailer Pneumatic  Nail Gun.

 

Three Additional Popular Brad Nailers You May Wish To Consider ...

WEN 18 Gauage Brad Nailer 61720 3/4 inch to 2 inch Air Nail Gun
DeWALT DWFP12231 Pneumatic 18-Gauge 2-Inch Brad Nailer Kit
BOSTITCH BTFP12233 Smart Point 18 Gauge Brad Nailer

WEN Air Nail Gun 61720 3/4 in. to 2 in. 18 Gauge Brad Nailer
DeWalt DWFP12231 Pneumatic 18-Guage 5/8" to 2" Brad Nailer Kit
Bostitch Smart Point 18 Gauge Brad Nailer BTFP12233
WEN 61720 3/4 inch to 2 inch 18 guage Brad Nailer with carrying case.
DeWalt DWFP12231 Pneumatic 18 Guage 5/8" to 2" Brad Nailer Kit
BOSTITCH BTFP12233 Smart Point 18 Gauge Brad Nailer Kit.
  • Reliable, economical nailer with a spacious magazine that carries up to 100 brads while the quick-release design makes jam clearing a breeze.
  • Effortlessly shoot brads anywhere from 3/4 inch to 2 inches in size with the WEN 18 Guage Brad Nailer.
  • With a lightweight (3 lb.) aluminum body and a comfortable rubber-grip handle this nailer is your perfect companion on the job site.
  • Operates at anywhere from 60 to 100 PSI with a 1/4 inch NPT air inlet fitting.
  • Kit includes adjustment wrenches, oil and a custom carrying case for easy transport and convenient storage.
  • Choose the direction for the air's output by rotating the adjustable exhaust port.
  • The magazine's transparent side window acts as a guage to help notify you when brads are running low.
  • more...
  • This brad nailer is an excellent tool with many enticing qualities.
  • A long life maintenance-free motor keeps from staining the work surface.
  • Smooth and fast sanding with 3.0 amp motor.
  • A magnesium body on the DEWALT DWFP12231 18 Guage 2 Inch Brad Nailer delivers a strong, yet lightweight design.
  • Features a tool-free depth-of-drive adjustment with detents for proper setting of nail heads.
  • Also features a tool-free jam release mechanism for easy nail removal.
  • A rear exhaust helps to keep contaminates away from work.
  • Made to drive 18 gauge nails from 5/8" to 2" in length.
  • Sequential style trigger.
  • 100 nail magazine capacity.
  • more...
  • With this nailer you can drive 18-Gauge brad nails from 5/8" to 2 1/8" in length.
  • The Bostitch Smart Point technology provides easy nail placement as a result of a smaller nose compared to current Bostitch nailers and their is no need to compress the contact trip to actuate the tool.
  • Oil-free operation reduces the risk of oil stains by the Bostitch Smart Point Brad Nailer.
  • Dial-A-Depth control for precise countersinking of brad nails.
  • Tool-free jam release mechanism for easy nail removal.
  • Nailer weight 3.1 lbs.
  • Selectable trigger system for sequential or contact operation.
  • Comes with carrying case.
  • Front of the magazine has a window that allows monitoring of a low nail condition.
  • more...
Available Online at:   Ebay   Amazon
Available Online at:   Ebay   Amazon
Available Online at:   Amazon  Ebay

Compare Top 4 Brad Nailers..
 

Tops In Coil Nailer Pneumatic Nail Guns

   Check Box This specific Coil Roofing Nailer by BOSTITCH is a favorite in roof air gun nail tools.

This little tank is built to last even under extreme job conditions. Bostitch makes sure of that by dragging it 75 miles across asphalt shingles in its testing labs.

Has a lightweight magnesium housing and carbide tips to give this tool a long life.

The RN46-1 weighs only 4.8 lbs. and delivers 410-inch-pounds of torque and it comes with unique features like a single-action, side-load canister that is quick and easy to load. Also has a dry-fire lockout so it won't fire when it runs out of nails.

Other features include carbide inserts where it might contact a work surface, skid-resistant pads, a tool-less shingle guide, an adjustable depth dial and an over-molded rubber grip.

Read Reviews and Purchase at: Amazon.com

BOSTITCH RN46-1 3/4 inch to 1 3/4 inch Coil Roofing Nailer.

 

Three Additional Popular Coil Nailers For Roofing, Siding and Framing

Makita AN611 1 1/4 inch to 2 1/2 inch Coil Siding Nailer
DeWALT D51855 Coil Framing Nailer 1 1/2 inch to 3 1/2 inch
Hitachi 7/8" to 1 3/4" 16 Degree NV45AB2 Coil Roofing Nailer

Makita AN611 1 1/4" to 2 1/2" Coil Siding Nailer
DeWalt D51855 Coil Framing Nailer 1 1/2" to 3 1/2"
Hitachi 7/8" to 1 3/4" 16 Degree Coil Roofing Nailer NV45AB2
Makita AN611 1 1/4" to 2 1/2" Coil Siding Nailer.
DEWALT D61866 Coil Framing Nailer 1 1/2 inch to 3 1/2 inch.
Hitachi 7/8 inch to 1 3/4 inch 16 Degree Coil Roofing Nailer NV45AB2.
  • A non-slipping nose with an ideal shape for diagonal nailing is just one of the features of this Makita AN611 1 1/4 inch to 2 1/2 inch Coil Siding Nailer.
  • Has an easy load canister.
  • Chose from either sequential or bounce fire with the nail-mode selector.
  • Operates at anywhere from 65 to 120 PSI.
  • A depth setting knob (9 settings in increments of 1/16 inch) allows for easy adjustment of nailing depth.
  • A rubber bumper protects the tool housing and a built-in air filtering system allows the tool to keep itself clean.
  • A 360-degree exhaust system allows you to direct exhaust away from you the operator.
  • Comfortable rubber grip.
  • Built-in air filter to prevent dust from entering the nailer.
  • more...
  • Unique engine design generates power to bury nails in both standard framing lumber and engineered lumber with minimal recoil.
  • The nail tray on this Dewalt D51855 Coil Framing Nailer pulls out for easy nail loading and has an easy push button for nail size adjustment.
  • Tool-free adjustable depth allows for quick and easy depth of drive setting.
  • Minimized air consumption and sufficient power to sink a 3 1/2" x .131" nail into engineered lumber.
  • An overmolded rubber handle allows for a comfortable and controlled operation of the nailer.
  • Has an adjustable rafter hook that allows you to hang the nailer on a rafter or belt while not in use.
  • Trigger lock-off allows the trigger to be disabled when not in use.
  • more...
  • An ideal tool for a variety of construction projects, including installation of asphalt roofing shingles and insulation boards, the Hitachi NV45AB2 coil roofing nailer featues a high-capacity side-load magazine.
  • Holds 120 nails with nail sizes of 7/8" to 1 3/4".
  • Uses standard roofing nails.
  • Lightweight (5.5 lbs.), well-balanced and durable.
  • 70-120 PSI recommended.
  • Rubber safety valve covering resists dirt, tar, etc..
  • Carbide tipped push lever to reduce wear.
  • Shingle guide.
  • Tool-less depth of drive adjustment for precision nailing.
  • Rubber pads help keep nailer from sliding off the roof when not in use.
  • more...
Available Online at:   Ebay   Amazon
Available Online at:   Ebay   Amazon
Available Online at:   Amazon  Ebay

Compare Top 4 Roofing Siding Nailers.
 

Tops In Finishing Nailer Pneumatic Nail Guns

   Check Box This specific Finishing Nailer by Hitachi is a favorite in finishing nail guns.

This Hitachi NT65MA4 15-Gauge angle finish nailer is the ideal nailer for installing crown and base moldings, chair rails, window and door casings, exterior trim, cabinets and staircases.

The angled magazine and compact body make for easier placement and operation in tight angles.

The NT65MA4 accepts 15-gauge nails from 1 1/4 inch to 2 1/2 inch in length. The integrated air duster can be used to clear away dust and debris from the work surface in preparation for nailing or gluing.

This 15 gauge angle finish nailer has a tool-less, easy to clear nose for quick nail extraction should a nail jam occur during use of the nailer.

Ligheweight at just 4.2 lbs allowing less fatigue while working.

Read More Features, Reviews and Purchase at: Amazon.com

Hitachi NT65MA4 15-Gauge angled finish nailer for crown and base moldings, window and door casings, cabinets, chair rails, exterior trim and staircases.

 

Three Additional Popular Finishing Nailers for Window and Door Casings, Crown and Base Molding, Cabinets, etc.

Makita AF601 16 Gauge 2 1/2 inch Straight Finish Nailer
Bostitch N62FNK-2 Industrial 16 Gauge Oil-Free Angled Finish Nailer Kit
DeWALT DC618K XRP 18 Volt 16 Gauge Cordless Angled Finish Nailer, Includes Case

Makita AF601 16 Gauge 2 1/2 inch Straight Finish Nailer
Bostitch N62FNK-2 Industrial 15 Gauge Oil-Free Angled Finish Nailer Kit
DeWALT DC618K 18 Volt XRP 16 Gauge Cordless Angled Finish Nailer + Case
Makita AF601 16 Gauge 2 1/2 inch Straight Finish Nailer.
Bostitch N62FNK-2 Industrial 15 Ga. Oil-Free Angled Finish Nailer Kit.
New DeWalt DC618K XRP 18 Volt 16 Gauge Cordless Angled Finish Nailer plus Case.
  • This finish nailer has a rear-loading magazine that accepts standard 16 gauge straight finish nails size 1 inch to 2 1/2 inch.
  • The nail lock-out and large windows alert you when to reload nails as the contact arm and trigger are used together for controlled firing.
  • Engineered for all day professional use the Makita AF601 16 Gauge Straight Finish Nailer includes a reversible belt hook that allows you to keep the tool close-by for when you need it.
  • A multi-directional exhaust port allows direction of the exhaust air away from you the user.
  • Has a built-in air duster that provides convenient air flow to clear your workspace.
  • The Makita AF601 has a 2-mode selector switch offering quick control over nailing operations.
  • more...
  • This finish nailer is one of the industry's lightest at just 3.8 lbs.
  • Oil free engine on the Bostitch Angled Finish Nailer requires no lubrication and leaves no oil stains on your workspace.
  • Tool-free adjustable deflector conveniently directs exhaust away from you.
  • Adjustable depth control for quick countersinking adjustments.
  • Tool-free removable magazine for fast cleaning and jam clearning.
  • Bypass nail pusher simplifies loading to one easy step.
  • Angled magazine for maximum maneuverability.
  • Use this finish nailer for Staircases, Cabinet work, Furniture, Interior finish and trim and Exterior finish and trim.
  • Operating Pressure: 70-120 PSI.
  • Magazine capacity: 130 nails.
  • more...
  • 18 Volt Cordless Angled Finish Nailer by DeWALT delivers fast steady work while providing consistent nail penetration into both soft and hard joints.
  • This cordless unit drives a large volume of nails per charge and features a convenient, 20 Degree, rear-loading magazine with a 120-nail capacity, accepts Paslode 20 degree nails.
  • Headlights illuminate your job site in low-light conditions.
  • Features sequential-operating and bump-operating modes for added versatility.
  • Easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenches.
  • Contact tip lock-off allows the trigger to be disabled when not in use.
  • Drives fasteners from 1 1/4 inch to 2 1/2 inch.
  • Highly portable.
  • more...
Available Online at:   Ebay   Amazon
Available Online at:   Ebay   Amazon
Available Online at:   Amazon  Ebay

Compare Top 4 Finish Nailers.
 

Nail Gun Safety

  • Always wear a good pair of safety glasses to protect your eyes in case a nail ricochets off the work surface and bounces towards you.
  • When you finish using your nailer, immediately disconnect air hose and turn off compressor.
  • If you have small children where the nailer is located get one with a lockout lever to prevent them from accidentally discharging it.
  • Only place your fingers on the trigger when preparing to drive in a nail.
  • Always check to make sure the nose guard is in place and working properly.

 


Portable Generator Reviews
| Privacy Policy | Contact | About Us | Sitemap

"This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.Com."

"Affiliate Disclosure: Most of the links on this site to other retailer sites are affiliate links, which means that if you click on the link and make a purchase at that site I will receive a commission on your purchase.    Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network. I appreciate and Thank You for your support."